Producecolloidal silver water yourself with the Ionic-Pulser®
With the Ionic Pulser® Standard S silver generator from Medionic , you can easily produce the purest colloidal silver water yourself. In just 20 minutes, 200 ml of water is enriched with colloidal silver at a concentration of 25 ppm. In addition to a comprehensive scope of delivery for the production of colloidal silver, you also receive a 2-year manufacturer's guarantee for the colloidal silver generator from Medionic.
With over twenty years of experience, Medionic is the contact for devices for the quick and easy production of colloidal silver. The result of these years of experience is the Ionic-Pulser®.
If you would like to find out more about colloidal silver or silver water, you can here for more information.
Why should you buy the Ionic-Pulser® silver generator?
The Ionic-Pulser® from Medionic is a state-of-the-art device for the production of colloidal silver, which can also be used for the production of colloidal gold, copper or zinc.
When you buy the colloidal silver generator Ionic-Pulser® Standard S, you benefit from simple operation, intelligent electronics and a high degree of purity
Simple operation
The silver water generator is as easy to use as a coffee machine. In just 20 minutes, 200 ml of water is enriched with colloidal silver at a concentration of 25 ppm.
The Ionic-Pulser® was deliberately kept simple and straightforward so that it is easy to operate. It does not require any fault-prone components such as a display or controller, which ensures a longer service life
Intelligent electronics with temperature and water control
Regardless of the temperature and quality of the water used, even quantities of silver are always dispensed.
The intelligent electronics of the Ionic-Pulser® automatically adjust to the electrical conductivity of the water. This means that silver water concentrations of up to 200 ppm and more are possible with very high concentration accuracy and optimum particle size. Tests by several independent laboratories confirm this information.
This means that the devices are primarily designed for water with the lowest conductivity and are therefore able to produce the highest quality colloidal silver even with aqua bidest (i.e. double distilled water).
Degree of purity
The fine silver content of the MED Plus electrodes is at least 99.99%. A very high material density is achieved through a special rolling process, which results in particularly small particle sizes*.
Measurements have shown that the particle size in the fresh solution is significantly smaller than 7 nm. This means, among other things, that the so-called Tyndall effect only becomes visible after approx. 2-3 days.
How is the Medionic Ionic-Pulser® Standard S used?
The operation of the Ionic-Pulser Standard S is very simple.
- First heat distilled water or demineralized water, e.g. with a kettle, and allow it to cool for 3 minutes.
To produce distilled water, we recommend the blue green Water Pro water distiller, which you can purchase here at Naturprodukte.store .
- Insert the supplied original Medionic silver electrodes into the device. The silver electrodes should be positioned at a slight angle in the ionic pulser.
- Pour the cooled water into a drinking glass.
- Connect the Medionic Pulser to the mains adapter supplied and place the device on the glass so that the silver electrodes are in the water.
- Now plug the power supply unit into a socket. The LED light of the Ionic Pulser will now light up.
- Then pour the solution through a paper filter (coffee filter) to remove any foreign particles from the solution.
As so-called electrode sludge normally forms on the electrodes, they should be cleaned with a kitchen towel after each run.
You can use the table in the enclosed instructions to see how long the Ionic-Pulser® needs for the desired concentration. Medionic recommends a concentration of 25 ppm for most applications .
The silver generator ensures a constant silver output regardless of the type of water and proportional to the production time (VarioPlus in operating mode A). You can therefore determine the exact concentration.
How should self-produced colloidal silver be stored?
You can use colloidal silver for many months, but its charge continuously decreases and it should therefore be used as fresh as possible.
In order to ensure the shelf life of your home-made colloidal silver, you should observe the following:
- Do not place the silver solution in electromagnetic fields (next to an electric stove, TV and stereo etc.).
- Do not keep the silver water in the refrigerator, but store it in a cool and dark room
- Fill the colloidal silver in dark glass bottles and not in plastic or metal containers
- Do not dilute the silver solution to change the concentration.
Accessories and scope of delivery
When you buy the Medionic Ionic-Pulser® Standard S, you will of course receive a 2-year manufacturer's warranty.
In addition to detailed operating instructions with a table for determining the silver concentration, the following is included in the scope of delivery:
- 1 Ionic-Pulser® Standard S with electronic control according to the Ionic-Pulser® system for precise silver concentrations, up to 46 volts electrode voltage
- 1 power supply unit, custom-made 33V AC voltage - 100-240V, also suitable for countries with 110V mains voltage!
- 1 pair of original silver electrodes MED plus with specific degree of hardness, fine silver content at least 99.99%, dimensions: 2.70 x 82 mm, sufficient for over 120 liters (at 25 ppm), manufactured by a company certified in accordance with the Medical Devices Act
Additional original silver electrodes for your Ionic-Pulser®, as well as other silver products from other manufacturers, can be ordered at any time from here at any time.
Our WEEE number: 49712528
Technical details
| Electrode voltage |
5-46 Volt |
| Electrode weight |
approx. 5.9 g per electrode |
| Electrode capacity |
150 - 200 liters at 25mg/l |
| Electrode dimensions |
3.0 x 82 mm |
| Electrode purity |
over 99.99%over 99.99 |
| Dimensions in cm |
12.8 x 4.7 x 2.7 (LxWxH) |
| Weight in kg (gross, incl. packaging) |
0.300 |
| Power consumption |
max. 150 mA |
| Power supply input |
100 - 240 Volt |
| Power supply unit output |
30 Volt DC |
FREE Delivery on orders over 99€*
Prices Include All EU Duties & Tax
60 day refund or exchange
Delivery Across Europe
60 day refund
